Canterbury

Saltillo Terracotta Tiles Floor Before After Renovation Canterbury

Wax Sealed Saltillo Terracotta Hallway Floor Renovation in Canterbury

Earlier this year I went to visit a property in Canterbury to look at restoring a Terracotta tiled floor. The floor was approximately 11m2 and made from the larger Saltillo type Terracotta tiles. It had been in situ for some time and being located in the hallway it was subject to the heavy foot traffic of a busy household.

Having taken a closer look at the Terracotta tiles I could see there were many high spots due to poor installation by the original tiler, on top of that it had then been sealed with linseed oil followed by a wax paste. Wax was traditionally used to seal Terracotta floors, but it scratches easily and can lead to a thick build-up. Since the introduction of modern sealers designed for the job, we don’t recommend wax treatments anymore.

Saltillo Terracotta Hallway Floor Before Renovation Canterbury Saltillo Terracotta Hallway Floor Before Renovation Canterbury

We discussed the process to renovate the floor, explaining that the best course of action would be to use milling pads to level the surface of the tiles which would improve the finish and remove the built-up wax. Once prepared in this way the floor would be sealed to protect it going forward. They were happy with my quotation and we agreed a date to return and complete the work.

Renovating a Terracotta Tiled Hallway Floor

The use of Milling pads can generate a lot of slurry to our first task was to protect the surrounding areas using protective sheeting. The area was quite tight to work in, so we used the smaller six-inch milling pads which are encrusted with coarse industrial diamonds. The pads we fitted to a handheld buffer and worked over the tiles gradually increasing the pads from coarse to finer grits. The machine we use has a water feed that keeps the surface lubricated and this also helps to reduce the dust. The fine slurry generated using this process is rinsed off and extracted with a wet vacuum.

The next step was to remove the old wax the floor had been treated with a dilution of Tile Doctor Wax Away which is designed for exactly this purpose. Its applied to the floor and then scrubbed in using a slow speed rotary machine. Afterwards the floor is rinsed with water several times and the waste removed with the wet vacuum. By the time we had finished that day we could see a big improvement in the floor surface. After the final rinse the floor was left to dry off overnight.

Sealing a Terracotta Tiled Hallway Floor

I came back the following day and using the moisture meter checked that the floor was dry. It was well within the accepted parameters, so I was ready to apply the seal.

To seal the Terracotta, I had selected to use Tile Doctor Colour Grow, this is a modern durable sealer that provides long lasting protection and ideal for busy hallways. Colour grow also also enhances the natural red and orange colours in the Terracotta leaving a nice subtle finish. Three coats of Tile Doctor Colour Grow were applied.

Saltillo Terracotta Hallway Floor After Renovation Canterbury Saltillo Terracotta Hallway Floor After Renovation Canterbury

The photographs I took don’t show the difference in the floor that well, however my customer was very happy with the improvement in the floor and glad that the potential trip hazard has been resolved.

 

Professional Restoration of a Terracotta Tiled Hallway in East Kent

Wax Sealed Saltillo Terracotta Hallway Floor Renovation in Canterbury Read More »

Limestone Tiled Pool Surround Repairing and Cleaning Canterbury

Limestone Swimming Pool Tiles Repaired and Polished in Canterbury

This was meant to be a relatively straightforward clean and polish of the Limestone tiles surrounding a swimming pool at a large house on the outskirts of Canterbury. However, after visiting the property to survey the installation I discovered that a lot of the tiling around the edge of the pool was loose and water was getting in underneath.

I discussed the problem with the owner and concerned about health safety he asked me to remove the affected tiles and refit them securely. The Limestone tiles were also stained due to the chemicals in the pool however I already had a plan to burnish the stone tiles to resolve that problem. We agreed a date for the work and the owner agreed to have the pool drained in order to make the tiling work much easier.

Re-Tiling a Loose Limestone Swimming Pool Surround

I returned to the property on the agreed date and started by setting up some scaffolding and adding plastic sheeting to the pool to protect the tiling. The next step was to tackle the loose Limestone which is when I discovered that the tiles had only been secured in a few places with what could best be described as blogs of tile adhesive which left a large cavity for water to sit. This practice is often referred to in the tiling trade as “Dot and Dab” and very much frowned upon. The tiles should have been fully bonded onto a layer of adhesive that had been spread with a notched trowel to form a very secure bond and ensure water could not seep underneath.

Limestone Swimming Pool Tile Surround Dot and Dab Canterbury

TIP: If you want to check your tiling to see if it has been “Dot and Dabbed” then tap the tiles with the end of a wooden broom handle, it should sound dull throughout, if the tapping sounds hollow in certain areas then this indicates Dot and Dabbing.

The remedy was to lift all the affected limestone edging including the dabbed adhesive and then allow the affected area to dry out thoroughly. I then returned two weeks later to level off the surface with a water proof screed before re-installing the tiles. The tile adhesive and grout needed to be dry before the next stage of cleaning so once I had completed this step, I used the rest of the day to clean up and removing the plastic sheeting and scaffolding.

Limestone Swimming Pool Tile Surround Repair Canterbury

Deep Cleaning Stained Limestone Tiles

On the next day I checked my previous work was secure and then set about cleaning the floor with a set of Diamond burnishing pads. You start with the application of a coarse 400-grit pad, then move onto medium 800-grit pad, fine 1500-grit pad and finishing with the extra fine 3000-grit pad.

The pads are fitted to a rotary floor buffer and are run over each tile using water for lubrication. The floor is rinsed between the application of each pad so the fine slurry produced can be extracted using a wet vacuum. Fortunately, due to the pool being emptied I didn’t have to worry too much about contaminating the pool water.

The pads made a big difference to the stained Limestone and really brought out the best in the them. Once the pool had been refilled the whole scene looked amazing, I just wished I taken more pictures.

Limestone Swimming Pool Tile Surround After Repair and Clean Canterbury

 

Professional Restoration of a Limestone Flooring in Kent

Limestone Swimming Pool Tiles Repaired and Polished in Canterbury Read More »

╳
Scroll to Top